Multi-range Portable Conductivity Meter – HI9033

Deskripsi

Multi-range Portable Conductivity Meter – HI9033 cocok untuk digunakan dalam berbagai aplikasi. Ia menawarkan empat rentang pengukuran dari 0,0 mikrodetik / cm ke 199,9 mS / cm dengan akurasi FS ± 1%. The HI76302W empat cincin konduktivitas probe yang disertakan dengan meteran memungkinkan untuk berbagai pengukuran dengan sensor tunggal. Teknologi empat cincin juga menghilangkan efek polarisasi yang umum dengan standar dua versi tiang. Probe juga dilengkapi sensor suhu built-in untuk memungkinkan Kompensasi Suhu Otomatis 0-50 ° C (32 sampai 122 ° F).

Features Multi-range Portable Conductivity Meter – HI9033 :

Four-ring Probe – The four-ring probe that comes with the HI9033 offers a versatile and accurate solution for conductivity readings. Four ring technology allows for a larger range of measurement within a single probe, whereas other meters with two probe technology is somewhat limited in the range in which they can measure.

Four Measurement Ranges – HI9033 offers four conductivity measurement ranges. Each range has a dedicated button on the face of the meter, allowing users to easily switch between ranges when necessary. The meter is programmed to let the user know when their current reading is out of range, and a new range should then be selected.

Automatic Temperature Compensation – Since temperature has such a dramatic effect on conductivity readings, having a meter that offers temperature compensated readings is invaluable. The probe of the HI9033 features a built-in temperature sensor that automatically accounts for the effects of temperature on a sample’s conductivity reading in the range of 0 to 50°C (32 to 122°F). The temperature compensation coefficient, also known as β, is set at 2%/°C; this factor corrects the conductivity reading 2% for each degree Celsius change in the sample.

One-point Calibration –  The HI9033 can be calibrated at one point in a standard conductivity solution. The calibration trimmer located on the top of the meter is easily adjusted to the correct calibration standard.

Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.