Multi Range Portable EC0-TDS Meter – HI8033 dirancang untuk digunakan dalam berbagai macam aplikasi. Hal ini dilengkapi dengan konduktivitas penyelidikan empat cincin untuk memungkinkan tiga rentang pengukuran EC dan satu rentang pengukuran TDS. Koefisien kompensasi suhu (β) adalah tetap pada 2% / ° C dan semua pembacaan konduktivitas disesuaikan secara manual untuk suhu, meyakinkan pengguna pengukuran konsisten dan akurat.
Detail Multi Range Portable EC0-TDS Meter – HI8033 :
Features Multi Range Portable EC0-TDS Meter – HI8033 :
Four-ring Probe – The HI76301W four-ring probe that comes with the HI8033 offers a versatile and accurate solution for conductivity readings. Four-ring technology allows for a larger range of measurement within a single probe, whereas two probe technology is somewhat limited in the range in which it can measure. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors.
Three Measurement Ranges – HI8033 offers three conductivity measurement ranges and one TDS measurement range. Each range can be selected by a dial on the face of the meter, allowing users to easily switch between ranges when necessary. The meter is programmed to let the user know when their current reading is out of range, and a new range should then be selected.
Manual Temperature Compensation – Since temperature has such a dramatic effect on conductivity readings, having a meter that offers temperature compensated readings is invaluable. The HI8033 allows users to adjust the temperature of the measurement solution through a knob on the face of the meter. The adjustment accounts for the effects of temperature on a sample’s conductivity reading in the range of 0 to 50°C (32 to 122°F).
Fixed Temperature Coefficient – As the temperature of a solution increases or decreases, the conductance becomes higher or lower, respectively. The temperature compensation coefficient, also known as β, is the factor that adjusts for the temperature of a solution to ensure an accurate reading is achieved. The HI8033 is programmed with a fixed β at 2%/°C; this factor corrects the conductivity reading by 2% for each degree Celsius change in the sample.
One-point Calibration – The HI8033 can be calibrated at one point in a standard conductivity solution. The calibration knob located on the face of the meter is easily adjusted to the correct calibration standard.